|
|
|
|
|
|
LC 0.9 MM
Features:
Available for both singlemode and multimode fibre
The small form factor connector is suited to high density application and is available in both simplex and duplex styles.
LC connectors use a 1.25mm diameter ferrule for quicker polishing times and enhanced performance.
Suitable for use with two part heat curing epoxies and cold cure anaerobic adhensives.
Available with either 900um boots for pigtail termination or crimp ring and boot for production of small diameter, 1.6mm, patchcords.
Typical singlemode insertion loss 0.1db
|
| ¡@ |
|
LC 3.0 SM
Features:
Available for both singlemode and multimode fibre
The small form factor connector is suited to high density application and is available in both simplex and duplex styles.
LC connectors use a 1.25mm diameter ferrule for quicker polishing times and enhanced performance.
Suitable for use with two part heat curing epoxies and cold cure anaerobic adhensives.
Available with either 900um boots for pigtail termination or crimp ring and boot for production of small diameter, 1.6mm, patchcords.
Typical singlemode insertion loss 0.1db
|
| ¡@ |
|
LC 0.9 SM
Features:
Available for both singlemode and multimode fibre
The small form factor connector is suited to high density application and is available in both simplex and duplex styles.
LC connectors use a 1.25mm diameter ferrule for quicker polishing times and enhanced performance.
Suitable for use with two part heat curing epoxies and cold cure anaerobic adhensives.
Available with either 900um boots for pigtail termination or crimp ring and boot for production of small diameter, 1.6mm, patchcords.
Typical singlemode insertion loss 0.1db
|
| ¡@ |
|
LC 2.0 Duplex MM
Features:
Available for both singlemode and multimode fibre
The small form factor connector is suited to high density application and is available in both simplex and duplex styles.
LC connectors use a 1.25mm diameter ferrule for quicker polishing times and enhanced performance.
Suitable for use with two part heat curing epoxies and cold cure anaerobic adhensives.
Available with either 900um boots for pigtail termination or crimp ring and boot for production of small diameter, 1.6mm, patchcords.
Typical singlemode insertion loss 0.1db
|
| ¡@ |
|
LC 3.0 MM
Features:
Available for both singlemode and multimode fibre
The small form factor connector is suited to high density application and is available in both simplex and duplex styles.
LC connectors use a 1.25mm diameter ferrule for quicker polishing times and enhanced performance.
Suitable for use with two part heat curing epoxies and cold cure anaerobic adhensives.
Available with either 900um boots for pigtail termination or crimp ring and boot for production of small diameter, 1.6mm, patchcords.
Typical singlemode insertion loss 0.1db
|
| ¡@ |
|
LC 2.0 Simplex SM
Features:
Available for both singlemode and multimode fibre
The small form factor connector is suited to high density application and is available in both simplex and duplex styles.
LC connectors use a 1.25mm diameter ferrule for quicker polishing times and enhanced performance.
Suitable for use with two part heat curing epoxies and cold cure anaerobic adhensives.
Available with either 900um boots for pigtail termination or crimp ring and boot for production of small diameter, 1.6mm, patchcords.
Typical singlemode insertion loss 0.1db
Application:
Telecommunications
LAN
CATV Networks
Active Device Termination
Industrial and Military
Instrumentation
FTTx
|
| ¡@ |
|
LC 2.0 Simplex MM
Features:
Available for both singlemode and multimode fibre
The small form factor connector is suited to high density application and is available in both simplex and duplex styles.
LC connectors use a 1.25mm diameter ferrule for quicker polishing times and enhanced performance.
Suitable for use with two part heat curing epoxies and cold cure anaerobic adhensives.
Available with either 900um boots for pigtail termination or crimp ring and boot for production of small diameter, 1.6mm, patchcords.
Typical singlemode insertion loss 0.1db
|
| ¡@ |
|
|
