¡@

PATCHCORD INTRODUCTION PATCHCORD ¡@ Mastercord ¡@ Patchcord/Pigtail ¡@ Fan out Patchcord CABLES ¡@ Singlemode ¡@ Multimode ¡@ LSZH/PVC CONNECTOR ¡@ DIN Connector ¡@ SC Connector ¡@ ST Connector ¡@ FC Connector ¡@ LC Connector ¡@ MT-RJ Connector ¡@ MPO Connector ¡@ MU Connector ADAPTOR ¡@ ST Adaptor ¡@ SCPC / SC APC Adaptor ¡@ FC Adaptor ¡@ LCPC / LC APC Adaptor ¡@ MTRJ Adaptor ¡@ MPO/MTP Adaptor ¡@ MU Adaptor ATTENUATOR ¡@ Fixed Attenuator CONNECTOR / SC Connector SC/APC 0.9 Features: Only used with singlemode fibre high return loss performance. Pre-radiused and 8 degree pre-angled ceramic ferrule. Suitable for use with two part heat curing epoxies and cold cure anaerobic adhensives. Available with either 900um botts for pigtail termination or 3.0mm crimp ring and boot for patchcord production. Typical insertion loss<0.25db. Return loss of 60db min. ADVANTAGES: 1.Low Insertion Loss 2.Low Return Loss 3.Shortened Transceiver Assembly Process ¡@ OD 0.9 Multimode Features: Available for both multimode and singlemode fibre. Simplex and Duplex styles available. Pre-radiused ceramic ferrules reduces polishing time and improves performance. Suitable for sue with two part heat curing epoxies and cold cure anaeroblic adhensives. Available with either 900um boots for pigtail termination or 3.0mm crimp ring and boot for patchcord production. Typical insertion loss<0.2db. ¡@ SC Duplex Clip Features: Zirconia ferrule Precise dimension Low insertion loss Low backreflection Convenience and ease of handling Environmentally stable Application: Telecommunications LAN CATV Networks Active Device Termination Industrial and Military Instrumentation FTTx ¡@ OD 2.0 Multimode Features: Available for both multimode and singlemode fibre. Simplex and Duplex styles available. Pre-radiused ceramic ferrules reduces polishing time and improves performance. Suitable for sue with two part heat curing epoxies and cold cure anaeroblic adhensives. Available with either 900um boots for pigtail termination or 3.0mm crimp ring and boot for patchcord production. Typical insertion loss<0.2db. ¡@ OD 3.0 Multimode Features: Available for both multimode and singlemode fibre. Simplex and Duplex styles available. Pre-radiused ceramic ferrules reduces polishing time and improves performance. Suitable for sue with two part heat curing epoxies and cold cure anaeroblic adhensives. Available with either 900um boots for pigtail termination or 3.0mm crimp ring and boot for patchcord production. Typical insertion loss<0.2db. ¡@ OD 0.9 Singlemode Features: Available for both multimode and singlemode fibre. Simplex and Duplex styles available. Pre-radiused ceramic ferrules reduces polishing time and improves performance. Suitable for sue with two part heat curing epoxies and cold cure anaeroblic adhensives. Available with either 900um boots for pigtail termination or 3.0mm crimp ring and boot for patchcord production. Typical insertion loss<0.2db. ¡@ OD 2.0 Singlemode Features: Available for both multimode and singlemode fibre. Simplex and Duplex styles available. Pre-radiused ceramic ferrules reduces polishing time and improves performance. Suitable for sue with two part heat curing epoxies and cold cure anaeroblic adhensives. Available with either 900um boots for pigtail termination or 3.0mm crimp ring and boot for patchcord production. Typical insertion loss<0.2db. ¡@ OD 3.0 Singlemode Features: Available for both multimode and singlemode fibre. Simplex and Duplex styles available. Pre-radiused ceramic ferrules reduces polishing time and improves performance. Suitable for sue with two part heat curing epoxies and cold cure anaeroblic adhensives. Available with either 900um boots for pigtail termination or 3.0mm crimp ring and boot for patchcord production. Typical insertion loss<0.2db. ¡@ SC/APC 2.0 Features: Only used with singlemode fibre high return loss performance. Pre-radiused and 8 degree pre-angled ceramic ferrule. Suitable for use with two part heat curing epoxies and cold cure anaerobic adhensives. Available with either 900um botts for pigtail termination or 3.0mm crimp ring and boot for patchcord production. Typical insertion loss<0.25db. Return loss of 60db min. ADVANTAGES: 1.Low Insertion Loss 2.Low Return Loss 3.Shortened Transceiver Assembly Process ¡@ SC/APC 3.0 Features: Only used with singlemode fibre high return loss performance. Pre-radiused and 8 degree pre-angled ceramic ferrule. Suitable for use with two part heat curing epoxies and cold cure anaerobic adhensives. Available with either 900um botts for pigtail termination or 3.0mm crimp ring and boot for patchcord production. Typical insertion loss<0.25db. Return loss of 60db min. ADVANTAGES: 1.Low Insertion Loss 2.Low Return Loss 3.Shortened Transceiver Assembly Process ¡@ ¡@ ¡@