¡@

PATCHCORD INTRODUCTION PATCHCORD ¡@ Mastercord ¡@ Patchcord/Pigtail ¡@ Fan out Patchcord CABLES ¡@ Singlemode ¡@ Multimode ¡@ LSZH/PVC CONNECTOR ¡@ DIN Connector ¡@ SC Connector ¡@ ST Connector ¡@ FC Connector ¡@ LC Connector ¡@ MT-RJ Connector ¡@ MPO Connector ¡@ MU Connector ADAPTOR ¡@ ST Adaptor ¡@ SCPC / SC APC Adaptor ¡@ FC Adaptor ¡@ LCPC / LC APC Adaptor ¡@ MTRJ Adaptor ¡@ MPO/MTP Adaptor ¡@ MU Adaptor ATTENUATOR ¡@ Fixed Attenuator CONNECTOR / ST Connector ST 2.0 MM Features: Available for both multimode and singlemode fibre. Optically and mechanically compatible with BFOC2.5 One piece design features pre-radiused ceramic ferrules. Suitable for use with two part heat curing epoxies and cold cure anaerobic adhensive. Available with either 900um boots for pigtail termination or 3.0mm crimp ring and boot for patchcord production. Typical insertion loss<0.3db ¡@ ST 0.9 SM Features: Available for both multimode and singlemode fibre. Optically and mechanically compatible with BFOC2.5 One piece design features pre-radiused ceramic ferrules. Suitable for use with two part heat curing epoxies and cold cure anaerobic adhensive. Available with either 900um boots for pigtail termination or 3.0mm crimp ring and boot for patchcord production. Typical insertion loss<0.3db ¡@ ST 2.0 SM Features: Available for both multimode and singlemode fibre. Optically and mechanically compatible with BFOC2.5 One piece design features pre-radiused ceramic ferrules. Suitable for use with two part heat curing epoxies and cold cure anaerobic adhensive. Available with either 900um boots for pigtail termination or 3.0mm crimp ring and boot for patchcord production. Typical insertion loss<0.3db ¡@ ST 3.0 SM Features: Available for both multimode and singlemode fibre. Optically and mechanically compatible with BFOC2.5 One piece design features pre-radiused ceramic ferrules. Suitable for use with two part heat curing epoxies and cold cure anaerobic adhensive. Available with either 900um boots for pigtail termination or 3.0mm crimp ring and boot for patchcord production. Typical insertion loss<0.3db ¡@ ST 3.0 MM Features: Available for both multimode and singlemode fibre. Optically and mechanically compatible with BFOC2.5 One piece design features pre-radiused ceramic ferrules. Suitable for use with two part heat curing epoxies and cold cure anaerobic adhensive. Available with either 900um boots for pigtail termination or 3.0mm crimp ring and boot for patchcord production. Typical insertion loss<0.3db ¡@ OD 3.0 Singlemode(ST) Features: Available for both multimode and singlemode fibre. Optically and mechanically compatible with BFOC2.5 One piece design features pre-radiused ceramic ferrules. Suitable for use with two part heat curing epoxies and cold cure anaerobic adhensive. Available with either 900um boots for pigtail termination or 3.0mm crimp ring and boot for patchcord production. Typical insertion loss<0.3db ¡@ ¡@ ¡@